Order Number: 6AV7882-0CB30-7CA0
Product Name: SIMATIC IPC277E Nanopanel PC
Product Series: SIMATIC IPC277E (Compact Industrial Panel PC)
Lifecycle Status: Active (PM300)
Core Feature: 12″ industrial touch TFT, quad-core Celeron, dual Gigabit PROFINET, CFast slot, IP65 front, 24V DC, Windows 10 IoT LTSB, fanless design for cabinet-mount industrial automation
1. Basic Identification
| Parameter | Detailed English Specification |
|---|---|
| Full Description | SIMATIC IPC277E Nanopanel PC, 12″ touch TFT display, Intel Celeron N2930 (4C/4T), 8 GB DDR3L RAM, 240 GB industrial SSD, CFast slot, 2× Gigabit Ethernet, 1× DisplayPort, 1× USB 3.0, 3× USB 2.0, 1× serial COM (RS-232/422/485), 24 V DC wide-range power, front IP65, fanless cooling, Windows 10 IoT Enterprise LTSB 2016 64-bit MUI, no pre-installed SIMATIC software |
| Form Factor | Flush panel-mount compact industrial PC (for control cabinet door installation) |
| Operation Type | Single-touch industrial resistive/capacitive touch (gloves operable) |
| Front Protection | IP65 (dust-tight, water-jet resistant, oil/coolant proof) |
| Rear Protection | IP20 |
| Cooling System | Fanless passive cooling (no moving parts, high reliability) |
| Country of Origin | Germany |
| Certifications | CE, cULus, RoHS, IEC 61131-2, EMC compliant industrial standards |
| Net Weight | Approx. 1.9–2.1 kg |
| Mounting Angle | Vertical installation, max tilt ±45° |
2. Display & Touch Specifications
| Item | Value |
|---|---|
| Diagonal Size | 12″ (30.5 cm) |
| Display Type | TFT LCD, LED backlight, wide viewing angle |
| Native Resolution | 1280 × 800 (WXGA) |
| Aspect Ratio | 16:10 widescreen |
| Backlight Lifetime | ≥ 50,000 hours at 25 °C ambient |
| Brightness | Industrial-grade, anti-glare coating |
| Touch Technology | Industrial single-touch, operable with gloves or damp conditions |
| Touch Interface | Integrated controller, no external driver required for basic operation |
| Front Bezel | Sealed, rugged, anthracite gray, IP65-rated industrial bezel |
3. Core Hardware Specifications
3.1 Processor & Memory
| Component | Specification |
|---|---|
| CPU | Intel Celeron N2930, quad-core, 4 threads, industrial embedded grade |
| Base Frequency | 1.83 GHz, burst up to 2.16 GHz |
| Cache | 2 MB L2 cache |
| System Memory | 8 GB DDR3L SDRAM, low-power, onboard, non-ECC |
| Max Memory Upgrade | Fixed 8 GB (no user-expandable slots) |
| Primary Storage | 240 GB 2.5″ industrial SSD, SATA III, high endurance |
| Expansion Storage | 1× CFast slot (for additional storage/boot expansion) |
| Storage Interface | SATA III 6 Gb/s, industrial-grade stability |
3.2 Complete Interface List
| Interface | Quantity & Type |
|---|---|
| USB | 1× USB 3.0 (rear); 3× USB 2.0 (rear); no front USB |
| Ethernet / PROFINET | 2× Gigabit Ethernet (10/100/1000 Mbps), RJ45, PROFINET IO compatible |
| Serial Port | 1× COM1 (configurable RS-232 / RS-422 / RS-485), rear-mounted |
| Video Output | 1× DisplayPort (for secondary monitor extension) |
| Fieldbus | No integrated Profibus DP; supports via external modules |
| Audio | Line-out + Mic-in (HD Audio, rear interface) |
4. Power, Electrical & EMC Data
| Parameter | Specification |
|---|---|
| Input Voltage | 24 V DC nominal, wide-range 19.2–28.8 V DC |
| Power Consumption | Typical ≤ 25 W; Max ≤ 35 W (fanless low-power design) |
| Power Protection | Reverse polarity, overvoltage, overcurrent, short-circuit protection |
| Hold-up Time | ≥ 20 ms during voltage dip (per IEC standard) |
| EMC Immunity | IEC 61000-4-2: ±6 kV contact; ±8 kV air discharge; IEC 61000-4-3/-6 compliant |
| Isolation | Galvanic isolation between power and I/O interfaces |
5. Environmental Ratings
| Parameter | Specification |
|---|---|
| Operating Temperature | 0 °C … +50 °C (ambient, fanless) |
| Storage / Transport Temperature | −20 °C … +60 °C |
| Relative Humidity | 5–85% RH, non-condensing (full industrial range) |
| Vibration Resistance | IEC 60068-2-6: industrial grade for factory floor |
| Shock Resistance | IEC 60068-2-27: 15 g, 11 ms half-sine pulse |
| Altitude | Operating up to 2,000 m; storage up to 4,000 m |
| Pollution Degree | PD 2 (industrial environment) |
6. Mechanical & Mounting Data
| Parameter | Value |
|---|---|
| Mounting Type | Front flush mounting into control cabinet door |
| Front Dimensions (W×H) | Approx. 345 mm × 240 mm |
| Mounting Cutout (W×H) | Approx. 326 mm × 221 mm |
| Installation Depth | Shallow-depth design, approx. 55–60 mm (front to rear edge) |
| Chassis Material | Front: aluminum alloy + sealed plastic; Rear: steel |
| Front Color | Anthracite gray (Siemens standard industrial color) |
| Mounting Hardware | Standard rear clamping brackets included |
7. Software & Preinstallation
| Software Item | Details |
|---|---|
| Operating System | Windows 10 IoT Enterprise LTSB 2016, 64-bit, preactivated |
| Language Support | MUI (English, German, French, Italian, Spanish) pre-installed |
| OS Features | Write filter, UWF, embedded security, long-term support (LTSB) |
| Preloaded Software | No SIMATIC WinCC/WinCC Runtime, no TIA Portal components |
| Driver Package | Integrated drivers: touch, display, Ethernet, PROFINET, USB, serial, chipset, SSD |
| Compatibility | SIMATIC WinCC Advanced/Professional, TIA Portal V14 and later |
| Remote Management | Remote Desktop, VNC, Siemens industrial remote tools supported |
| Boot Options | Supports boot from internal SSD or CFast slot |
8. Communication & Networking Features
| Protocol | Capability |
|---|---|
| PROFINET IO | Full IO Controller / Device mode, dual Gigabit ports for network separation |
| Industrial Ethernet | TCP/IP, DHCP, DNS, OPC DA/UA, SNMP, MRP (Media Redundancy Protocol) |
| Serial Communication | RS-232/422/485 for legacy devices, scanners, printers, meters |
| USB Peripherals | HID devices, industrial scanners, printers, external storage, modems |
| Network Isolation | Two independent LAN ports for control network & office network segregation |
