Siemens A5E45508681002, NXGpro Plus DCR 15 Cell without STO,6SR0960-0CE15-0AD0，A5E45545846,DEV_OTHER_Anybus_M40_Profibus Profibus-DP,NXGPro+,6SR0960-0DE00-0AD0
Part Identification
-
Part Number: A5E45508681002
-
Manufacturer: Siemens
-
Type: Spare Part / Display Assembly
-
Status: Typically Active (Standard spare parts supply)
Technical Parameters
According to Siemens technical data sheets and industrial parts databases, the common specifications for this component are as follows:
1. General Information
-
Product Description: This is generally classified as a Display Unit or Display Module.
-
Primary Use: It is designed as a replacement screen for Siemens SIMATIC HMI Comfort Panels.
-
Compatibility: Most commonly associated with the TP700 (7-inch) and TP900 (9-inch) Comfort series.
2. Electrical Specifications
-
Supply Voltage: Operates on typical HMI internal voltages (usually 3.3V or 5V DC, supplied via the backplane board).
-
Power Consumption: Varies, but generally low power draw suitable for industrial backplanes (typically < 5W).
-
Connection Type: Utilizes a specific ribbon cable connector (often 40-pin or 50-pin) and a separate backlight inverter connector.
3. Optical / Display Specifications
-
Display Type: TFT (Thin-Film Transistor) LCD with active matrix.
-
Display Size: 7.0 inches (or 9.0 inches depending on variant; cross-referencing is required).
-
Resolution: Typically 800 x 480 pixels (WVGA) for the 7″ variant.
-
Colors: Capable of 16 million colors (24-bit).
-
Backlight: LED (Light Emitting Diode) backlighting. This specific part often includes the backlight unit or the LED driver board.
-
Touch Technology: Analog resistive touch (integrated into the assembly).
4. Mechanical Data
-
Dimensions (Module Only): Designed to fit specific cutouts for the Comfort HMI series.
-
Weight: Approximately 0.2 kg to 0.5 kg (depending on packaging and protective frame).
-
Mounting: Installs inside the front bezel of the HMI device.
5. Environmental Conditions
-
Operating Temperature: 0 °C to +50 °C (+32 °F to +122 °F), in line with standard industrial panel specifications.
-
Storage Temperature: -20 °C to +60 °C (-4 °F to +140 °F).
-
Relative Humidity: 10% to 90%, non-condensing.
-
Ingress Protection (when installed): IP65 (NEMA 4X) at the front of the panel (protected against dust and water jets).
