Order Number: 6AV7882-0CB20-6CA0
Product Name: SIMATIC IPC277E Nanopanel PC
Product Series: SIMATIC IPC277E (Compact Industrial Panel PC)
Lifecycle Status: Active (PM300)
Core Feature: 12″ industrial touch TFT, quad-core Celeron, dual Gigabit PROFINET, CFast slot, IP65 front, 24V DC, Windows 7 Ultimate SP1 64-bit MUI, fanless, panel-mount for industrial automation
1. Basic Identification
| Parameter | Detailed English Specification |
|---|---|
| Full Description | SIMATIC IPC277E Nanopanel PC, 12″ touch TFT display, Intel Celeron N2930 (4C/4T), 4 GB DDR3L RAM, 240 GB industrial SSD, CFast slot, 2× Gigabit Ethernet, 1× DisplayPort, 1× USB 3.0, 3× USB 2.0, 1× serial COM (RS‑232/422/485), 24 V DC wide‑range power, front IP65, fanless passive cooling, Windows 7 Ultimate SP1 64‑bit MUI, no pre‑installed SIMATIC software |
| Form Factor | Flush front panel‑mount industrial PC (for control cabinet door installation) |
| Operation Type | Industrial single‑touch, operable with gloves/damp conditions |
| Front Protection | IP65 (dust‑tight, water‑jet resistant, oil/coolant proof) |
| Rear Protection | IP20 |
| Cooling System | Fanless passive cooling (no moving parts, high MTBF) |
| Country of Origin | Germany |
| Certifications | CE, cULus, RoHS, IEC 61131‑2, IEC 61000‑4‑x EMC compliant |
| Net Weight | Approx. 1.9–2.1 kg |
| Mounting Angle | Vertical installation, max tilt ±45° |
2. Display & Touch Specifications
| Item | Value |
|---|---|
| Diagonal Size | 12″ (30.5 cm) |
| Display Type | TFT LCD, LED backlight, wide viewing angle |
| Native Resolution | 1280 × 800 (WXGA) |
| Aspect Ratio | 16:10 |
| Backlight Lifetime | ≥ 50,000 hours at 25 °C ambient |
| Brightness | Industrial anti‑glare, high contrast for factory floor |
| Touch Technology | Industrial resistive single‑touch |
| Touch Interface | Integrated controller, plug‑and‑play basic operation |
| Front Bezel | Sealed anthracite gray, IP65‑rated rugged bezel |
3. Core Hardware Specifications
3.1 Processor & Memory
| Component | Specification |
|---|---|
| CPU | Intel Celeron N2930, quad‑core, 4 threads, embedded industrial grade |
| Base Frequency | 1.83 GHz, burst up to 2.16 GHz |
| Cache | 2 MB L2 cache |
| System Memory | 4 GB DDR3L SDRAM, low‑power, onboard, non‑ECC |
| Max Memory Upgrade | Fixed 4 GB (no user‑expandable slots) |
| Primary Storage | 240 GB 2.5″ industrial SSD, SATA III, high endurance |
| Expansion Storage | 1× CFast slot (bootable, for extra storage/OS expansion) |
| Storage Interface | SATA III 6 Gb/s |
3.2 Complete Interface List
| Interface | Quantity & Type |
|---|---|
| USB | 1× USB 3.0 (rear); 3× USB 2.0 (rear); no front USB |
| Ethernet / PROFINET | 2× Gigabit Ethernet (10/100/1000 Mbps), RJ45, PROFINET IO compatible |
| Serial Port | 1× COM1, software configurable RS‑232 / RS‑422 / RS‑485 |
| Video Output | 1× DisplayPort (for secondary monitor extension) |
| Audio | HD Audio line‑out + mic‑in (rear) |
| Fieldbus Onboard | No integrated Profibus DP; supported via external adapters |
4. Power, Electrical & EMC Data
| Parameter | Specification |
|---|---|
| Input Voltage | 24 V DC nominal, wide range 19.2–28.8 V DC |
| Power Consumption | Typical ≤ 22 W; Max ≤ 30 W |
| Power Protection | Reverse polarity, overvoltage, overcurrent, short‑circuit protected |
| Hold‑up Time | ≥ 20 ms during voltage dip (IEC standard) |
| EMC Immunity | IEC 61000‑4‑2: ±6 kV contact; ±8 kV air; IEC 61000‑4‑3/-6 compliant |
| Isolation | Galvanic isolation between power and I/O interfaces |
5. Environmental Ratings
| Parameter | Specification |
|---|---|
| Operating Temperature | 0 °C … +50 °C (ambient, fanless) |
| Storage / Transport Temperature | −20 °C … +60 °C |
| Relative Humidity | 5–85% RH, non‑condensing |
| Vibration Resistance | IEC 60068‑2‑6, industrial factory floor grade |
| Shock Resistance | IEC 60068‑2‑27, 15 g, 11 ms half‑sine pulse |
| Altitude | Operating up to 2,000 m; storage up to 4,000 m |
| Pollution Degree | PD 2 (industrial environment) |
6. Mechanical & Mounting Data
| Parameter | Value |
|---|---|
| Mounting Type | Front flush mounting into control cabinet door |
| Front Dimensions (W×H) | Approx. 345 mm × 240 mm |
| Mounting Cutout (W×H) | Approx. 326 mm × 221 mm |
| Installation Depth | Approx. 55–60 mm (shallow‑depth for thin cabinet doors) |
| Chassis Material | Front: aluminum alloy + sealed plastic; Rear: steel |
| Front Color | Anthracite gray (Siemens standard industrial) |
| Mounting Hardware | Standard rear clamping brackets included |
7. Software & Preinstallation
| Software Item | Details |
|---|---|
| Operating System | Windows 7 Ultimate SP1, 64‑bit, preactivated |
| Language Support | MUI (English, German, French, Italian, Spanish) pre‑installed |
| OS Features | Standard Windows 7 security, update support, embedded stability tweaks |
| Preloaded Software | No SIMATIC WinCC, WinCC Runtime, TIA Portal, or other automation software |
| Driver Package | Integrated drivers: touch, display, Ethernet, PROFINET, USB, serial, chipset, SSD |
| Compatibility | SIMATIC WinCC Advanced/Professional, TIA Portal V13 and later |
| Remote Management | Remote Desktop, VNC, industrial remote tools supported |
| Boot Options | Boot from internal SSD or CFast slot |
8. Communication & Networking Features
| Protocol | Capability |
|---|---|
| PROFINET IO | Full IO Controller / Device mode, dual Gigabit ports for network separation |
| Industrial Ethernet | TCP/IP, DHCP, DNS, OPC DA/UA, SNMP, MRP (Media Redundancy Protocol) |
| Serial Communication | RS‑232/422/485 for legacy devices, meters, scanners, printers |
| USB Peripherals | HID devices, industrial scanners, printers, external storage, modems |
| Network Isolation | Two independent LAN ports for control network & office network segregation |
