The Siemens 6SN1145-1AA01-0AA0 is an unregulated infeed module for SIMODRIVE 611A/D, delivering 10 kW continuous / 25 kW peak power, 3AC 380-480 V input, unregulated DC 540-680 V bus output, internal/external forced air cooling, and integrated mains contactor with break contact, designed for low-to-medium-power CNC and motion control systems requiring simple, cost-effective power supply without active energy regeneration.
Core Electrical Specifications
| Parameter | Value | Description |
|---|---|---|
| Model Number | 6SN1145-1AA01-0AA0 | Siemens SIMODRIVE 611 Unregulated Infeed Module (UI Module) |
| Input Voltage (Power/Electronics) | 3AC 380-480 V (-15% / +10%) | 3-phase AC, rated 400 V, industrial grid compatible |
| Input Frequency | 50/60 Hz | Dual-frequency for global deployment |
| DC Link Voltage | DC 540-680 V (unregulated) | Line-dependent, rectified output for drive modules |
| Rated Output Current (S1) | 17 A (continuous) | Corresponds to 10 kW continuous power at 400 V AC |
| Peak Output Current | 42 A (short-term) | Supports 25 kW peak power operation |
| Power Rating | 10 kW (continuous)/25 kW (peak) | Unregulated power, no active regeneration (passive braking via external resistor) |
| Power Factor | ≥ 0.95 (with line reactor) | Typical at rated load |
| Regeneration Capability | Passive (external braking resistor required) | No active energy feedback to grid; braking energy dissipated via resistor |
| Line Contactor | Integrated with break contact | Safe power interruption and system interlock |
| Efficiency (η) | 0.985 | High energy conversion efficiency |
| Input Power Cable Cross-Section | 16 mm² | For rated current carrying capacity |
Cooling & Physical Specifications
| Parameter | Value | Description |
|---|---|---|
| Cooling Method | Internal/external forced air cooling | Requires built-on fan 6SN1162-0BA02-0AA2 (ordered separately) |
| Protection Class | IP20 (front panel) | Suitable for control cabinet installation |
| Operating Temperature | 0°C – 45°C (no condensation) | Derate above 45°C |
| Storage Temperature | -25°C – 70°C | |
| Weight | 9.5 kg (20.94 lbs) | Net weight (approximate) |
| Dimensions (H×W×D) | 305 mm×100 mm×483 mm (12″×3.94″×19″) | 19″ rack-compatible, panel-mounted (module width: 100 mm) |
| Mounting | Panel-mounted (19″ rack) | Standard industrial cabinet fit |
| Compliance | CE, UL, CSA | Meets global safety and EMC standards |
Operational & Safety Features
- Unregulated Rectification: Converts 3-phase AC to unregulated DC for SIMODRIVE 611 drive modules, cost-effective for non-regenerative applications.
- Integrated Mains Contactor: With break contact for safe power interruption and system interlock.
- Thermal Monitoring: Internal/external forced air cooling with fan-based thermal protection to prevent overheating.
- Electronic Protection: Overcurrent, overvoltage, undervoltage, short-circuit, and overtemperature safeguards.
- EMC Compliance: EN 61000-6-2 / EN 61000-6-4 for industrial environments.
- Line Reactor Requirement: Must be equipped with a line reactor for optimal performance and EMC compliance.
Application Notes
- Powers SIMODRIVE 611 drive modules in low-to-medium-power CNC machine tools, automated production lines, and general motion control systems where energy regeneration is not required.
- Requires external braking resistor for dynamic braking (no active regeneration).
- Requires a built-on fan (6SN1162-0BA02-0AA2) for internal cooling (ordered separately).
- Discontinued (spare part only); replaced by 6SN1145-1AA01-0AA1/0AA2.
