| Basic Model Information |
Model |
6RA7082-6FV62-0-Z |
|
Configuration Extension |
G94 + K01 + K11 |
|
Product Series |
SIMOREG DC MASTER 6RA70 Series |
|
Device Type |
Fully Digital DC Drive |
| Rated Electrical Parameters |
Rated Armature Voltage |
3-phase 400V class (suitable for line voltage 380~480V AC) |
|
Rated Armature Current |
280A (continuous current under standard working conditions) |
|
Field Voltage |
Standard DC field output, compatible with rated field voltage within 180V DC |
|
Field Current |
Maximum support for 20A field current (specific value needs to match motor field parameters) |
| Configuration Function Description |
G94 |
Encoder interface module, supports incremental encoders (e.g., TTL/HTL types), used for motor speed closed-loop control to improve speed regulation accuracy and stability |
|
K01 |
Communication function extension, usually PROFIBUS-DP communication module, supports bus communication with upper computer equipment such as PLC, realizing remote control, parameter reading/writing and fault diagnosis |
|
K11 |
Process function extension, including ramp function generator optimization, torque limitation enhancement and other process control functions, suitable for precise speed/torque regulation under complex working conditions |
| Control Performance Parameters |
Speed Regulation Range |
1:10000 (in closed-loop control mode) |
|
Speed Stabilization Accuracy |
±0.01% (at rated speed, closed-loop with encoder) |
|
Control Mode |
Supports speed closed-loop, torque closed-loop and armature current closed-loop control |
|
Ramp Time |
0~3600s freely adjustable (acceleration/deceleration ramps adjustable independently) |
| Protection Functions |
Overload Protection |
1.5 times rated current for armature circuit, lasting 60s; 2 times rated current, lasting 3s |
|
Field Protection |
Field loss detection, field overcurrent protection |
|
Other Protections |
Overvoltage protection, undervoltage protection, overheating protection, motor locked-rotor protection |
| Environmental & Installation Parameters |
Operating Temperature |
0~45℃ (no derating); derated operation at 45~55℃ |
|
Storage Temperature |
-25~70℃ |
|
Protection Class |
IP20 (cabinet installation, need to be matched with control cabinet protection) |
|
Installation Method |
Cabinet embedded installation (standard guide rail or bolt fixing) |
| Applicable Motor Type |
|
Separately excited DC motor (recommended), series excited DC motor (parameter adjustment required) |
