6ES7151-1AA05-0AB0
SIMATIC DP, INTERFACE MODULE IM151-1 STANDARD FOR ET200S; INCL. TERMINATING MODULE DATA VOLUME 244BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 PERIPHERIEMODULES PROFIBUS DP V0 AND V1 UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D
| Parameter | Official Verified Value |
|---|---|
| MLFB Article Number | 6ES7151-1AA05-0AB0 |
| Full Designation | SIMATIC DP Interface Module IM151-1 Standard for ET200S |
| Matching System | ET 200S Distributed I/O Station |
| Included Accessory | Terminating module pre-supplied |
| Supported PROFIBUS Protocol | DP V0, DP V1 |
| Max Attached Peripheral Modules | 63 pieces |
| Max ET200S Station Width | 2 m |
| I/O Address Space | 244 bytes for inputs, 244 bytes for outputs |
| PROFIBUS Connector | 9-way D-sub RS485 interface |
| Supported Baud Rates | 9.6k / 19.2k / 45.45k / 93.75k / 187.5k / 500k / 1.5M / 3M / 6M / 12 Mbps |
| Rated Electronic Supply | 24 V DC (1L+) |
| Reverse Polarity Protection | Yes |
| Voltage Drop Buffer Time | Min 20 ms |
| PROFIBUS Galvanic Isolation | Yes; no isolation between backplane & electronics |
| Max PROFIBUS Output Current | 80 mA |
| Typical Power Dissipation | 3.3 W |
| Module Dimensions | 119.5 mm × 45 mm × 75 mm |
| Net Weight | Approx. 150 g |
| Mounting Standard | 35 mm DIN rail |
| Operating Ambient Temp | 0 °C ~ +60 °C (cabinet installation) |
| Storage/Transport Temp | -40 °C ~ +70 °C |
| Diagnostic Features | SF station fault, BF bus fault, power status LED indicators |
| Supported Functions | FREEZE, SYNC, direct data exchange, I&M data reading |
| Firmware Upgrade | Via PROFIBUS DP with STEP 7 software |
| Product Lifecycle Status | Discontinued legacy model, spare parts supply only |
| Country of Origin | Germany |
| Standard Warranty | 1-year factory limited warranty |
