Product Name: SIMATIC HMI KTP700 Basic Panel, Key + Touch Operation
Electrical Parameters (Voltage, Current, Power)
| Parameter | Value |
|---|---|
| Supply voltage type | DC |
| Rated supply voltage | 24 V DC |
| Permissible voltage range | 19.2 V DC … 28.8 V DC |
| Rated input current | 230 mA |
| Inrush current (I²t) | 0.2 A²·s |
| Typical active power input | 5.5 W |
Basic Display & Operation Specifications
- Display type: 7” TFT widescreen, LED backlighting
- Display resolution: 800 × 480 pixels
- Display colors: 65,536 colors
- Display dimensions (W×H): 154.1 mm × 85.9 mm
- Backlight dimming: Adjustable (dimmable)
- Backlight MTBF (at 25 °C): 20,000 hours
- Operation mode: Analog-resistive touch + 8 physical function keys
- On-screen keyboards: Numeric & alphanumeric supported
- Acoustic output: Buzzer (no speaker)
Hardware & Memory
- Processor: ARM architecture
- User configuration memory: 10 MB
- Real-time clock (RTC): Hardware, battery-backed; typical backup ~6 weeks
- Clock synchronization: Supported with system/network time
Interface Specifications
- Industrial Ethernet: 1 port; PROFINET, TCP/IP, DHCP, SNMP, DCP, LLDP supported
- USB: 1 × USB host (supports up to 16 GB external storage)
- Serial ports: No RS-232 / RS-422 / RS-485 integrated
- SD card slot: Not available
- Supported protocols: PROFINET, EtherNet/IP, Modbus TCP/IP
Mechanical Specifications
- Front panel material: Plastic
- Front dimensions (W×H): 214 mm × 158 mm
- Mounting cutout (W×H): 197 mm × 141 mm
- Total depth: 39 mm
- Net weight (unpacked): 780 g
- Gross weight (packed): 990 g
- Mounting: Vertical, landscape/portrait orientation supported; max tilt angle 35° without external ventilation
Environmental Specifications
- Operating temperature (vertical mount): 0 °C … 50 °C
- Operating temperature (max tilt): 0 °C … 40 °C
- Storage/transport temperature: -20 °C … 60 °C
- Relative humidity: Max 90%, non-condensing
- Protection rating: Front IP65, Rear IP20; NEMA Type 4/4X front
Certifications & Standards
- Approvals: CE, cULus, RCM, KC
- EMC: EN 55011 Class A (industrial environment)
- Marine certifications: GL, ABS, BV, DNV, LRS, Class NK supported
- Hazardous area use: Not approved for ATEX/IECEx/Class I Division 2 zones
